D15 Welding Task Light
Welding creates a serious challenge to visual acuity. The light emitted from gas and arc welding is intense, and contains high levels of both UV and IR light in wavelengths harmful to the human eye. For this reason, welders (myself included) wear helmets and goggles that utilize filters to reduce brightness, strip away the harmful wavelengths, and protect us physically from welding splatter, which is very nasty. Unfortunately this seriously compromises visibility of the welding task and its surrounding. While the arc itself illuminates the surrounding, the contrast between the arc itself and the area around it is so great that this affords little clarity. When smoke and splatter are included, most welding is done within a very poor visual field. In some cases, it is done almost completely blind.
Most welding glass passes light in a narrow green centered bandwidth, which is why the view through them is green, to the point of being monochromatic. That means most of the light from any task light used that generates white light will be filtered out along with the welding arc emission. That seems inefficient and reduces the effectiveness of the lighting system to the point of being essentially useless.
To address this I have been working on a task light that delivers a narrow spectrum green light, centered on the emission of the welding filter glass itself. This means that 100% of the light from the task light will come through the glass – a much more efficient approach. You can download a white paper WIP of my findings and concept at: Narrow Spectrum Welding Light.pdf
The concept is to use narrow spectrum green light, in this case 530nm Green, to more efficiently deliver visible light through welding glass filters.This increases intensity in the area of the task. It is very difficult to photograph exactly what one sees through the darkened welding glass, and impossible when an arc has been struck.
Back to Archive
© Lumenique, llc. All rights reserved